IC Blank Card — MIFARE Classic 4K (S70) / Fudan FM11RF32 RFID Smart Card
When 1 KB is not enough, the MIFARE Classic 4K (S70) card gives you 40 sectors — enough to run several independent applications on one credential. We offer both the NXP original and the Fudan FM11RF32 equivalent; the two share the same…
IC Blank Card — MIFARE Classic 4K (S70) / Fudan FM11RF32 — RFID Smart Card made by LOZAVY in our own factory in Shenzhen, China. Built around a NXP MIFARE Classic 4K (S70) or Fudan FM11RF32, Crypto-1 chip, operating at 13.56 MHz, measuring 85.6 × 54 × 0.84 mm (CR80 standard), moulded in PVC (PET / PET-G / PC on request), and the minimum order quantity is 100 pcs. Every unit is 100% RF tested before shipment. Stock samples ship in 1–2 working days, custom samples take 3–5 working days, and mass production runs 7–15 working days after approval. Printing, UID numbering and NDEF encoding are all handled in-house.
- Protocol
- ISO/IEC 14443-A
- Frequency
- 13.56 MHz
- Chip
- NXP MIFARE Classic 4K (S70) or Fudan FM11RF32, Crypto-1
- Capacity
- 4 KB EEPROM (40 sectors)
- Dimensions
- 85.6 × 54 × 0.84 mm (CR80 standard)
- Material
- PVC (PET / PET-G / PC on request)
Factory-direct pricing, quoted within 24 hours. Your unit price depends on chip, material, printing, quantity and packaging — send us the spec and we price it exactly, with no padding.
- Stock samples free (you cover shipping)
- Custom samples 3–5 working days
- Sample fee refunded at USD 10,000
Typical Applications
- Multi-application campus cards
- transport
- logistics
- loyalty
- Hotel key cards and guest room access
- Access control and staff ID badges
Key Specifications
- ProtocolISO/IEC 14443-A
- Frequency13.56 MHz
- ChipNXP MIFARE Classic 4K (S70) or Fudan FM11RF32, Crypto-1
- Capacity4 KB EEPROM (40 sectors)
- Data retention10 years, ≥100,000 write cycles
- Read range1–10 cm (reader & antenna dependent)
- Dimensions85.6 × 54 × 0.84 mm (CR80 standard)
- MaterialPVC (PET / PET-G / PC on request)
- ColorWhite (matte / gloss / frosted optional)
- MountingLoose card — slot punching on request
- WaterproofIP65 (laminated card body)
- Storage temp-40°C to +85°C
- Working temp-20°C to +50°C
- CertificationISO 9001 & ISO 14001 factory; RoHS, REACH, CE, FCC documentation
- ApplicationMulti-application campus cards, transport, logistics, loyalty
- Write endurance100,000 cycles (see chip line)
- Anti-collisionYes, supports multi-card operation
- PersonalisationFull-colour offset print, logo, photo, variable data, UID laser code, barcode / QR
- Add-onsMagnetic stripe, signature panel, embossing, hole punch, scratch panel
- Pre-encodingUID, NDEF or sector data written before shipment
- MOQ100 pcs
How We Compare
- Supply chain LOZAVY: Own 20,000 m² factory in Shenzhen, China — you audit the real production line Typical market practice: Trading companies resell from unnamed workshops with no audit access
- RF testing LOZAVY: 100% RF tested before shipment, chip by chip Typical market practice: Batch sampling only, defective rate usually not disclosed
- Minimum order LOZAVY: From 100 pcs on standard epoxy tags and key fobs Typical market practice: Commonly 500–1,000 pcs for customised NFC products
- Sampling speed LOZAVY: Stock samples free (you cover shipping), shipped in 1–2 working days; custom samples 3–5 working days Typical market practice: Samples often charged and take 1–2 weeks
- Customisation scope LOZAVY: Chip, size, shape, printing, UID laser numbering and NDEF encoding in one factory Typical market practice: Printing and encoding often outsourced to separate vendors
- Sample fee refund LOZAVY: Fully credited back once the bulk order reaches USD 10,000 Typical market practice: Sample fees are usually non-refundable
When 1 KB is not enough, the MIFARE Classic 4K (S70) card gives you 40 sectors — enough to run several independent applications on one credential. We offer both the NXP original and the Fudan FM11RF32 equivalent; the two share the same command set, so a 1K deployment can migrate to 4K without touching the reader firmware.
Key Features
- Four times the storage of a 1K card, structured as 32 small plus 8 large sectors.
- Runs several applications in parallel — access, canteen, loyalty — each with its own keys.
- Same instruction set as 1K, so existing MIFARE infrastructure keeps working.
Typical Applications
- Multi-application campus one-card
- Canteen and vending payment
- Regional transport cards
- Warehouse and logistics ID
Customisation Options
Every card is produced in our own factory, so the card body and the artwork are handled under one roof. Choose offset or digital printing for full-colour artwork, add a magnetic stripe (LoCo / HiCo), a signature panel, embossed numbering, a scratch-off panel or a punched slot. We can also pre-write your UID, NDEF record or sector keys so the cards go straight into your system on arrival. Artwork is checked by our engineers before plating, and we send a digital proof for approval.
Samples, MOQ & Lead Time
MOQ is 100 pcs per chip specification. Stock samples are free of charge and you only cover the shipping — they ship within 1–2 business days by DHL or FedEx. Custom sampling takes 3–5 days and carries a sample fee, which is credited back in full once the related bulk order reaches USD 10,000 or more. Standard lead time for 10,000 cards is about 12–15 days after artwork approval. Every card is 100% RF tested before packing, and we ship worldwide on EXW, FOB, CIF or DDP terms.
RF & Chip
Physical
Environment & Durability
Compliance & Customization
Additional
What we can customize
How it works
- 1Requirements
- 2Sampling
- 3Sample approval
- 4Mass production
Frequently asked questions
What is the minimum order quantity?
Can I get a sample before placing an order?
How long does mass production take?
Can you print our logo and pre-encode the chips?
Which certifications and quality checks do you provide?
Still have questions? Send us an inquiry and we reply within 12 hours.
